Felt like having a look at this circuit last night. I know this has been a request for a long time, but better late than never. And I do hope it’s correct. Let me know.
Update (25.02.2012): Now verified, thanks to Glenn.
Check the FAQ section. This is quite common with gain-pedals.
Thanks fpr the layout harold, but i have an issue with my pedal, im dont have a dual or stereo 250k potentiometer for the gain, so i decided to change it with two, mono or single 250k pot. It worked great with one pot turn max, and the other one turn only at 9 o’clock. But when i turn all the gain pot at max, it making some loud high pitched noise… I still have not know the problem yet, i hope you guys can help me for my build
Overall thankyou for the layout, cheers…
Hi everybody,
I have sound until R14 and after I do not know where the signal goes.
Are there any people to help me, please?
Thanks.
I need to debug…
Hi,
I’ve made this and it isn’t work.
I’m a noob and I do not realy understand where the sound go from the input to the output.
Another question, is the build is true bypass or not?
Thank you for your help.
Cedric
Thanks a lot mr. harald.
I believe so Bruce, minus the switching circuitry and input buffer.
Hi Harald, this is the stock BD-2, correct?
Thanks a lot for this one – works great, as does all other veros i built from you!
That’s great, Glenn! This one was for you, so I’m happy you liked it. Thanks for verifying 🙂
Sorry, I didnt mean to call you Harold….Harald!
Hi, Harold, I’m so glad you made this layout.I attempted to make a layout on my own, but although I know what I’m doing i just cant seem to get it small enough, but anyways…
I built this and it sounds great, so it’s verified.
The only thing (with my build) i dont have a dual 250k, only a dual 100.Still works, just maybe not as dynamic? Anyways, my wife has her friend over so i cant play it much tonight, nut it sounds good and is qiuet.Thanks again Harold.
Check the FAQ section. This is quite common with gain-pedals.
Thanks fpr the layout harold, but i have an issue with my pedal, im dont have a dual or stereo 250k potentiometer for the gain, so i decided to change it with two, mono or single 250k pot. It worked great with one pot turn max, and the other one turn only at 9 o’clock. But when i turn all the gain pot at max, it making some loud high pitched noise… I still have not know the problem yet, i hope you guys can help me for my build
Overall thankyou for the layout, cheers…
Hi everybody,
I have sound until R14 and after I do not know where the signal goes.
Are there any people to help me, please?
Thanks.
I need to debug…
Hi,
I’ve made this and it isn’t work.
I’m a noob and I do not realy understand where the sound go from the input to the output.
Another question, is the build is true bypass or not?
Thank you for your help.
Cedric
Thanks a lot mr. harald.
I believe so Bruce, minus the switching circuitry and input buffer.
Hi Harald, this is the stock BD-2, correct?
Thanks a lot for this one – works great, as does all other veros i built from you!
That’s great, Glenn! This one was for you, so I’m happy you liked it. Thanks for verifying 🙂
Sorry, I didnt mean to call you Harold….Harald!
Hi, Harold, I’m so glad you made this layout.I attempted to make a layout on my own, but although I know what I’m doing i just cant seem to get it small enough, but anyways…
I built this and it sounds great, so it’s verified.
The only thing (with my build) i dont have a dual 250k, only a dual 100.Still works, just maybe not as dynamic? Anyways, my wife has her friend over so i cant play it much tonight, nut it sounds good and is qiuet.Thanks again Harold.