I was thinking about building an analog octave effect like the Boss OC-2, and decided to put together a layout for this interesting project. Not
Category: Filter

Update (16.12.14): Verified as working, thanks to Alec! I’ve been meaning to do this one for a long time, and here it is. I no

Update (10.07.2014): Minor changes to the schematic and vero layout to make it work properly with the tap-tempo clock project; tap input switch, series resistor

Update (16.07.2014): Revision 1 layout now verified as working, thanks to jack 🙂 Update (11.10.2013): Turns out just blindly drawing a layout based on the

Here’s another octave down effect; the Shin-Ei Octave Box. I based this on the schematic from Topopiccione, with a slight modification to the octave switch

I’ve been busy doing amp stuff lately and you might have noticed I haven’t done many layouts lately. But here’s a new one 🙂 This

Going to build an octave up for a friend and came over this one when looking around. Not sure what this sounds like or whether

For no apparent reason, here’s a vero layout for the Bespeco Weeper wah effect. I guess you could either set this up as a “fixed-wah”

This one’s an experiment and there’s a real chance this initial version won’t work correctly, so keep that in mind if you’re trying this right

Make your guitar sound more like an acoustic. Mark Hammer’s schematic and design documentation can be found here. Apparently there are a few conditions that need