I’ve recently put together “my own” take on a VCA compressor. I put that in quotes because most of the design is straight from the
Tag: by sabro
![](https://www.sabrotone.com/wp-content/uploads/2017/12/20171119_000538207_iOS.jpg)
As with the Workhorse, I had some fun designing a PCB for the “mutant” circuit. Here are the results: Mutant
![](https://www.sabrotone.com/wp-content/uploads/2017/11/20170310_143008301_iOS.jpg)
I’ve been tinkering with some PCB design lately. Here’s the results of my first project. Link: Workhorse
![](https://www.sabrotone.com/wp-content/uploads/2017/11/20171029_175144125_iOS.jpg)
I’m going to be short and to the point since I’m poor at writing. It was finally time to build amplifier #4! This time I
![](https://www.sabrotone.com/wp-content/uploads/2016/05/20140809_141438351_iOS.jpg)
You might remember I tried my hands at pickup winding a while ago (was it more than a year ago already?) creating a set of
![](https://www.sabrotone.com/wp-content/uploads/2016/05/20160508_172417545_iOS.jpg)
I’ve built another high-gain effect to address some of the short comings of the “Lighthaus” (mostly the issue of noise). I’m absolutely loving the result.
![](https://www.sabrotone.com/wp-content/uploads/2015/08/20150519_220128087_iOS.jpg)
I’ve been doing some more cooking lately. This one is a rework of the Openhaus, which is way too big and costly to build for
![](https://www.sabrotone.com/wp-content/uploads/2014/04/WP_20140708_10_46_53_Pro.jpg)
Update (25.04.2016): The new version (v2) is up and running, and I’ll try to share as much as possible on github. Source code Pinout Example
![](https://www.sabrotone.com/wp-content/uploads/2014/02/tap_tempo_tremulus_1_2.png)
Update (10.07.2014): Minor changes to the schematic and vero layout to make this work with the tap-tempo clock project; tap input switch, series resistor and