I’ve recently put together “my own” take on a VCA compressor. I put that in quotes because most of the design is straight from the
Tag: verified
![](https://www.sabrotone.com/wp-content/uploads/2017/12/20171119_000538207_iOS.jpg)
As with the Workhorse, I had some fun designing a PCB for the “mutant” circuit. Here are the results: Mutant
![](https://www.sabrotone.com/wp-content/uploads/2017/11/20170310_143008301_iOS.jpg)
I’ve been tinkering with some PCB design lately. Here’s the results of my first project. Link:Â Workhorse
![](https://www.sabrotone.com/wp-content/uploads/2017/11/20171029_175144125_iOS.jpg)
I’m going to be short and to the point since I’m poor at writing. It was finally time to build amplifier #4! This time I
![](https://www.sabrotone.com/wp-content/uploads/2016/05/20160508_172417545_iOS.jpg)
I’ve built another high-gain effect to address some of the short comings of the “Lighthaus” (mostly the issue of noise). I’m absolutely loving the result.
![](https://www.sabrotone.com/wp-content/uploads/2015/08/20150519_220128087_iOS.jpg)
I’ve been doing some more cooking lately. This one is a rework of the Openhaus, which is way too big and costly to build for
![](https://www.sabrotone.com/wp-content/uploads/2014/04/WP_20140708_10_46_53_Pro.jpg)
Update (25.04.2016): The new version (v2) is up and running, and I’ll try to share as much as possible on github. Source code Pinout Example
![](https://www.sabrotone.com/wp-content/uploads/2014/02/TapTempoChorus1.gif)
Update (07.08.2015): This one is now verified as working, thanks to Patrick 🙂 Update (10.07.2014): Minor change to the schematic and vero layout adding a
![](https://www.sabrotone.com/wp-content/uploads/2014/02/SlowGear.gif)
Update (16.12.14): Verified as working, thanks to Alec! I’ve been meaning to do this one for a long time, and here it is. I no